Description
Method of Use: Surface Preparation, All surfaces must be clean dry and free from dust grease and any loose material, if degreasing is necessary a detergent/water treatment should be considered first, if this is not appropriate a suitable solvent cleaner may be used. Always check the effects of degreasing solvents on plastics, rubber materials and painted surfaces, All traces of cleaning solvent must be allowed to evaporate before the adhesive is applied. Application and bonding. It is always best to coat both surfaces, Spray onto a clean dry & dirt free surface from approximately 10″ (25cm), Spray two coats if surface is dusty, Apply floor covering to substrate whilst the adhesive is still tacky, Press the floor covering into place starting at the centre and working outwards.
Store in a cool dry well ventilated area at between 10-30c
Typical Characteristics
Physical appearance: Low Viscosity Liquid
Colour: Amber
Chemical Type: Acrylic
Solvent: Acetone
Viscosity Brookfield RVT 20rpm at 25c (mPa.s): Approx 60cps
Total Solids Content: Approx 20%
Relative Density: Approx 1.2
Reviews
There are no reviews yet.